Regupol Resilient One Part Adhesive

Regupol Resilient one part adhesive is specifically formulated to bond Regupol 4515-S Acoustic Underlay to most common interior sub-floors. It is also specifically designed to bond approved resilient floor coverings to the Regupol 4515-S Acoustic Underlay.

In approved applications, this adhesive can also be used to adhere Regupol and everroll rubber flooring products in DRY areas.

This Australian made adhesive is available in 10 Litre pots.

Relative Humidity (RH) resistance: 85% and falling (ASTM F2170).

Important: Prior to installation, the resilient floor covering should be checked and approved for compatibility for dual bonding to the Regupol 4515-S Acoustic Underlay using the Regupol Resilient One Part Adhesive.  

Coverage:

1.   When adhering Regupol 4515-S Acoustic Underlay to concrete substrate, use a V1 (1.6mm) trowel - allow approx. 4.5-5.0m2/L or 45m2 per pot.

2.   When adhering approved resilient floors up to 2mm thick to Regupol 4515-S Acoustic Underlay - use a V1 (1.6mm) trowel - allow approx. 4.5-5.0m2/L or 45m2 per pot. NOTE: for resilient floors over 2mm thick contact ABS West for appropriate trowel size.

3.   When adhering all other Regupol and everroll flooring products directly to substrate - use a V2 (2.4mm) trowel - allow approx. 3.0-3.5m2/L or 30m2 per pot.